|
 |
|
Stunning Gallery |
| Our professional staff is
dedicated to helping you achieve your dream
projects. We have some beautiful photographs in
our gallery showcase
. |
|
|
|
| |
| |
|
|
 |
|
|
Frequently Asked Questions |
What is
manufactured stone?
A mixture of Portland Cement, Lite Weight Aggregates, and Iron Oxide Dyes that when finished has all the characteristics of natural stone.
How is it made?
The mixture is poured into molds cast from real stones, and allowed to dry. It is then pulled from the molds and ready for delivery. Colors on and in the stones are varied using Iron Oxide Dyes to create its natural look.
What are the
benefits?
Manufactured Stone is in most cases less expensive than natural stone. Installation is easier, and the stone itself is just as durable as natural stone. No footer or brick ledge required due to the fact that it is lighter than real stone.
Do I need to seal the
stone after installation?
No, you do not have to seal it, but can if you so choose. Many people prefer to use a sealer on stone that is applied to interior walls, fireplaces and backsplashes.
How is it
installed?
Manufactured Stone can be installed over any sound surface using regular mortar. Please read our installation instructions below for more details.
How durable is the
stone?
Manufactured Stone is very durable, in fact we offer a limited 50 year warranty on all our products.
What does it
cost?
Feel free to E-Mail or call us for pricing, as we offer discount prices for high volume orders.
How can I contact
Summit Stone?
Use the contact link at the top of this page to E-Mail or Call us.
sales@summitstoneproducts.com
1-877-345-4161 (toll free)
1-479-885-0557 (Office)
1-479-885-0558 (Fax)
What does your shipping cost?
We will need the square footage you are interested in, the zip code where the shipment will be sent and your contact info. We will then be able to put a shipping quote together that will be good for 7 days.
Do you offer a
Distributor Package?
Yes we do offer distributorship. Please contact our office in regards to a distributor package.
What if I do not find a
color of stone I like?
We will get with you and come up with a custom color that suits your specific needs at no extra cost to you.
Can I get a sample of
your stone?
Yes, we will ship samples of our stone. We require that you pay the shipping which is the Flat Rate at the Post Office at the time of Shipment.
Manufactured Stone InstallationBuilding code requirements vary
from area to area. Check with local authorities
for building code requirements in your area.
Carefully read all installation instructions prior
to installation. Stone is warranted when installed
in accordance with installation
instructions.
Estimating stone required
Wall area is L x H
Window/Door width x Window/Door height is Window/Door area
Lineal feet of all corners x .75 = area covered by corners
Wall area - window/door area - area covered by corners = square flats required.
Materials required
MORTAR: Premixed - Type N mortar, follow manufacturers recommendation.
Can use our premixed ACTION MORTAR which is made
specifically for this
application, just add water.
Mortar can be colored with
iron oxide dyes.
WEATHER BARRIER - Dependent on local codes. Barrier must be used on all exterior
and interior installations except those over masonry, concrete,
or stucco.
FLASHING � Used to maintain weather resistance of exterior wall which stone is
applied.
METAL LATHE - A minimum of 2.5 lb. galvanized metal lathe must be used over any
surface other than unpainted, unsealed cement or block wall.
FASTENERS - Galvanized nails or staples.
Installation
Manufactured stone can be installed on any sound wall surface. Use of weather barrier
Then metal lathe, followed by a scratch coat of mortar is required on any surface other than fresh or unpainted, unsealed concrete, or blocks. If installing over cement or blocks, then the stone can be directly applied to the surface by mortaring the back of each stone and applying directly to wall. If unusually dry conditions exist, then lightly dampen the surface or the back of each stone before applying mortar. If installing over a painted or sealed cement surface, then either pressure wash the surface clean of all paint/sealer, or cover with metal lathe. In all exterior applications, keep finished edge of stone a minimum of 4 inches above of earth, and 2 inches above pavement/slab. Cutting of stone can be achieved with a masonry saw, or regular chop saw with a diamond blade.
Cleaning
Use of a whisk broom or dry
bristle brush can clean stone surfaces after
mortar has completely set up. DO NOT USE a wire
brush or wet brush, as these can damage the face
of the stone. DO NOT USE ACID OR ACID BASED
PRODUCTS, PRESSURE WASHING, SANDBLASTING, or WIRE
BRUSH cleaning to clean the surface of the stones.
Summit Stone Products Inc.
Toll Free 1-877-345-4161
Office: 479-705-2002
Fax:
479-705-3010 |
|
|
|
